Attenzione: i dati modificati non sono ancora stati salvati. Per confermare inserimenti o cancellazioni di voci è necessario confermare con il tasto SALVA/INSERISCI in fondo alla pagina
IRIS
For the first time the astrophysical factor of the B-10(p, alpha(0)) Be-7 reaction has been measured over a wide energy range, from 5 keV to 1.5 MeV, via the Trojan horse method (THM) applied to the quasifree H-2(B-10, alpha Be-7) (n) reaction. Therefore, the S(E) factor has been recast into absolute units by scaling in the energy range 200 keV-1.2 MeV to a recent measurement using the activation method, leading to a normalization uncertainty of 4%. AnR-matrix fit of theTHMdatawas performed, to parametrize the S factor, obtain spectroscopic information on the populated resonances, and compare with other recent experiments. Finally, a new determination of the screening potential U-e has been obtained, Ue = 240 +/- 50 eV, with a much smaller error than our previous measurement.
Measurement of the B-10(p, alpha(0)) Be-7 cross section from 5 keV to 1.5 MeV in a single experiment using the Trojan horse method / Spitaleri, C., Puglia, S., La Cognata, M., Lamia, L., Cherubini, S., Cvetinovic, A., D'Agata, G., Gulino, M., Guardo, G.l., Indelicato, I., Pizzone, R.g., Rapisarda, G.g., Romano, S., Sergi, M.l., Sparta, R., Tudisco, S., Tumino, A., Del Santo MG, ., Carlin, N., Munhoz, M.g., et al.. - In: PHYSICAL REVIEW C. - ISSN 2469-9985. - 95:3(2017). [10.1103/PhysRevC.95.035801]
Measurement of the B-10(p, alpha(0)) Be-7 cross section from 5 keV to 1.5 MeV in a single experiment using the Trojan horse method
For the first time the astrophysical factor of the B-10(p, alpha(0)) Be-7 reaction has been measured over a wide energy range, from 5 keV to 1.5 MeV, via the Trojan horse method (THM) applied to the quasifree H-2(B-10, alpha Be-7) (n) reaction. Therefore, the S(E) factor has been recast into absolute units by scaling in the energy range 200 keV-1.2 MeV to a recent measurement using the activation method, leading to a normalization uncertainty of 4%. AnR-matrix fit of theTHMdatawas performed, to parametrize the S factor, obtain spectroscopic information on the populated resonances, and compare with other recent experiments. Finally, a new determination of the screening potential U-e has been obtained, Ue = 240 +/- 50 eV, with a much smaller error than our previous measurement.
Measurement of the B-10(p, alpha(0)) Be-7 cross section from 5 keV to 1.5 MeV in a single experiment using the Trojan horse method / Spitaleri, C., Puglia, S., La Cognata, M., Lamia, L., Cherubini, S., Cvetinovic, A., D'Agata, G., Gulino, M., Guardo, G.l., Indelicato, I., Pizzone, R.g., Rapisarda, G.g., Romano, S., Sergi, M.l., Sparta, R., Tudisco, S., Tumino, A., Del Santo MG, ., Carlin, N., Munhoz, M.g., et al.. - In: PHYSICAL REVIEW C. - ISSN 2469-9985. - 95:3(2017). [10.1103/PhysRevC.95.035801]
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11388/239508
Citazioni
ND
44
48
social impact
Conferma cancellazione
Sei sicuro che questo prodotto debba essere cancellato?
simulazione ASN
Il report seguente simula gli indicatori relativi alla propria produzione scientifica in relazione alle soglie ASN 2023-2025 del proprio SC/SSD. Si ricorda che il superamento dei valori soglia (almeno 2 su 3) è requisito necessario ma non sufficiente al conseguimento dell'abilitazione. La simulazione si basa sui dati IRIS e sugli indicatori bibliometrici alla data indicata e non tiene conto di eventuali periodi di congedo obbligatorio, che in sede di domanda ASN danno diritto a incrementi percentuali dei valori. La simulazione può differire dall'esito di un’eventuale domanda ASN sia per errori di catalogazione e/o dati mancanti in IRIS, sia per la variabilità dei dati bibliometrici nel tempo. Si consideri che Anvur calcola i valori degli indicatori all'ultima data utile per la presentazione delle domande.
La presente simulazione è stata realizzata sulla base delle specifiche raccolte sul tavolo ER del Focus Group IRIS coordinato dall’Università di Modena e Reggio Emilia e delle regole riportate nel DM 589/2018 e allegata Tabella A. Cineca, l’Università di Modena e Reggio Emilia e il Focus Group IRIS non si assumono alcuna responsabilità in merito all’uso che il diretto interessato o terzi faranno della simulazione. Si specifica inoltre che la simulazione contiene calcoli effettuati con dati e algoritmi di pubblico dominio e deve quindi essere considerata come un mero ausilio al calcolo svolgibile manualmente o con strumenti equivalenti.