“Prefabricated stabilising timber walls anchored with glued-in rods – Experimental tests and preliminary design.”

A new beam and post system for multi-storey timber buildings has been developed in Sweden. The building is braced with timber walls constructed from two Kerto-Q LVL boards glued and screwed onto a glulam frame. The walls are prefabricated off-site and can be connected to the foundation using either glued-in steel rods with metric thread or nail plates. Introductory racking tests of full scale walls anchored with glued-in threaded rods were performed. The paper presents the results of the experiments and discusses the use of the transformed section method to predict racking capacity of the anchored wall. To evaluate the strength of the glued-in rods, a newly proposed model was employed. An analytical study was conducted to investigate the role of the sheathing and the contribution of the axial force on the racking capacity of the walls. The wall panels tested in this experimental programme showed high strength and stiffness under racking load. The anchoring joints with glued-in steel rods with metric thread demonstrated a high load-carrying capacity with, however, large scatter and a brittle failure mode characterized by pull-out from the timber member. The transformed section method was successfully used to predict the racking capacity of timber walls anchored with glued-in steel rods.