The present paper shows the first results of an ongoing research aimed at studying the potentiality of the combination of laminated timber and natural fibers to obtain high-performance structural elements. The experimentation conducted has involved a set of Cross Laminated Timber (CLT) panels made of maritime pine grown in Sardinia (Italy) and externally reinforced with natural flax fibers fabrics. A bending test program has been carried out on two CLT layouts, three-layers and five-layers panels, for a total of 34 specimens. Three-layers panels have been tested with single and double strip of flax fibers aiming to evaluate any difference in the rupture mechanism, capacity and stiffness. The proposed technique allows a straightforward application on the intrados of the panel, aimed at increasing its capacity and stiffness. Results show that in case of three-layers panels a significant increment of load-carrying capacity and stiffness has been achieved, whilst for five-layers panels the effectiveness of the reinforcement is negligible. Variations in the failure mechanisms of reinforced panels have been discussed.

Reinforcement of maritime pine cross-laminated timber panels by means of natural flax fibers / Valdes, M.; Giaccu, G. F.; Meloni, D.; Concu, G.. - In: CONSTRUCTION AND BUILDING MATERIALS. - ISSN 0950-0618. - 233:(2020), p. 117741. [10.1016/j.conbuildmat.2019.117741]

Reinforcement of maritime pine cross-laminated timber panels by means of natural flax fibers

Giaccu G. F.;
2020-01-01

Abstract

The present paper shows the first results of an ongoing research aimed at studying the potentiality of the combination of laminated timber and natural fibers to obtain high-performance structural elements. The experimentation conducted has involved a set of Cross Laminated Timber (CLT) panels made of maritime pine grown in Sardinia (Italy) and externally reinforced with natural flax fibers fabrics. A bending test program has been carried out on two CLT layouts, three-layers and five-layers panels, for a total of 34 specimens. Three-layers panels have been tested with single and double strip of flax fibers aiming to evaluate any difference in the rupture mechanism, capacity and stiffness. The proposed technique allows a straightforward application on the intrados of the panel, aimed at increasing its capacity and stiffness. Results show that in case of three-layers panels a significant increment of load-carrying capacity and stiffness has been achieved, whilst for five-layers panels the effectiveness of the reinforcement is negligible. Variations in the failure mechanisms of reinforced panels have been discussed.
2020
Reinforcement of maritime pine cross-laminated timber panels by means of natural flax fibers / Valdes, M.; Giaccu, G. F.; Meloni, D.; Concu, G.. - In: CONSTRUCTION AND BUILDING MATERIALS. - ISSN 0950-0618. - 233:(2020), p. 117741. [10.1016/j.conbuildmat.2019.117741]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11388/233058
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 21
  • ???jsp.display-item.citation.isi??? 16
social impact